ტექნიკური მახასიათებლები
| Cycle Time - Open | 1.9 s 1.9 s |
| Cycle Time - Close | 1.3 s 1.3 s |
| Cutting Force - Blade Throat | 887 Sh Ton 7890 kN |
| Cutting Force - Blade Center | 351 Sh Ton 3124 kN |
| Cutting Force - Blade Tip | 186 Sh Ton 1652 kN |
| Excavator Minimum | 32 tons 32 tons |
| Excavator Maximum | 50 tons 50 tons |
| Jaw Circuit - Max. Oil Pressure | 5076 psi 350 bar |
| Jaw Circuit - Max. Oil Flow | 74 gal/min 280 l/min |
| Rotation Circuit - Max. Oil Pressure | 2321 psi 160 bar |
| Rotation Circuit - Max. Oil Flow | 11 gal/min 40 l/min |
| Jaw Depth | 26.7 in 677 mm |
| Cutter Length | 22.5 in 572 mm |
| Jaw Opening - Maximum | 18.5 in 471 mm |
| Jaw Width - Fixed | 13 in 330 mm |
| Jaw Width - Moveable | 4.5 in 115 mm |
| Width | 84.5 in 2146 mm |
| Length | 63.6 in 1615 mm |
| Height | 39.6 in 1005 mm |
| Weight - Housing, Jaw and Bracket | 7024 lb 3186 kg |
| Weight - Jaw Only | 2899 lb 1315 kg |
უპირატესობები და მახასიათებლები
Cycle Times are 50 Percent Faster
- New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
- You’ll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there’s no load.
- Maximum crushing/cutting force is applied as soon as the jaw contacts material.
Up to 19 Percent More Force
- Process more per hour, ship more per shift, make more every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
- Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
- Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.
Change Jaws in 15 Minutes
- Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
- Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
- MP332 accepts these jaw types:
- Concrete Cutter – outer jaw cracks concrete; inner shear jaw cuts steel
- Demolition – opens wide to crack the largest concrete structures
- Pulverizer – crushes concrete, separating the rebar
- Shear – cuts structural steel, pipe, and cable
- Tank Shear – cuts at right angle on three sides, cleanly cutting tanks or plate steel
- Universal – innovative design cuts steel and crushes concrete
Durable and Maintainable
- Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
- Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
- Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.
