Technicial Specifications
General
Electrical System
Hydraulic Oil Cooling
Operator's Cab
Swing System
Undercarriage
Automatic Lubrication System
Attachment
Operating Weights - Backhoe
Hydraulic System with Electronic Pump Management
Centralized Service Area
Digging Forces
Working Ranges
Operating Specifications
Bucket
Engine - Equivalent to U.S. EPA Tier 2
Diesel Engine - Lesser Regulated
Diesel Engine - Tier 4 Final
Diesel Engine - Equivalent to Tier 2
Diesel Engine - Highly Regulated
Engine - U.S. EPA Tier 4 Final
| Engine Output - SAE J1995 | 776 kW |
| Bucket Payload | 21.6 t |
| Operating Weight | 230.2 t |
| Note | Specifications shown above apply to a Backhoe configuration. A frontless configuration is also available. |
| Standard Bucket Capacity | 12 m³ |
| Batteries (12V each) - In Series/Parallel Installation | 630 Ah – 24V |
| Components (3) | 9 LED high-brightness working flood lights: – 7 for working area<br>– 2 for rear end |
| Batteries (12V each) | 6 × 210 Ah |
| Components (1) | Emergency stop buttons inside cab, accessible from all seating locations, and engine module |
| Components (2) | Additional ground-level emergency stop |
| System Voltage | 24V |
| Battery Isolation Relays | manual lockable disconnect switch and automatic disconnect relay |
| Components (6) | 1 beacon lamp on cab roof |
| Components (5) | 7 LED service lights |
| Components (4) | 2 LED high-brightness access flood lights |
| Features (2) | Variable electronically controlled flow of oil through cooler and fan speed |
| Oil Flow of Cooling Pumps | 800 l/min |
| Diameter - Fan | 1500 mm |
| Features (1) | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity available whenever engine is running |
| Features (3) | Superior cooling efficiency to ensure optimum oil temperature |
| Components (5) | Full sized trainer seat with safety belt and work table |
| Internal Dimensions of Cab - Width | 1625 mm |
| Components (7) | Operator Protective Guard (rock guard; approved according to ISO 10262:1998 [Top Guard]) compliant |
| Components (9) | Roller blinds |
| Components (11) | Additional emergency ladder in close proximity to emergency escape window |
| Internal Dimensions of Cab - Length | 2230 mm |
| Components (8) | Windshield with parallel intermittent wiper/washer |
| Components (2) | Pneumatically cushioned and multi-adjustable operator seat with lumbar support, safety belt, head- and armrests |
| New BCS Features (1) | Robust instrument panel including large (254 mm/10 in) color touch screen |
| New BCS Features (3) | Graphical data logging |
| New BCS Features (4) | Fault memory capabilities |
| Operator's Eye Level (approximate) | 5.5 m |
| New BCS Features (2) | On-screen troubleshooting assistance |
| Components (10) | Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated |
| New BCS Features (5) | USB, Lan (TCP/IP) and CAN BUS interfaces for data export |
| Components (3) | Safety switch in operator's seat for automatic motion shutdown |
| Internal Dimensions of Cab - Height | 2070 mm |
| Components (1) | Large cab floor window with removable grating for easy cleaning |
| Components (4) | Joystick integrated in adjustable seat armrest |
| New Board Control System (BCS) Features: | Electronic monitoring, data logging and diagnostic system for vital signs & service data of engines, hydraulic & lube system |
| Components (6) | Auxiliary fold-away seat with safety belt for 3rd person |
| Swing Ring | Triple-race roller bearing with sealed internal gearing |
| Maximum Swing Speed | 4.9 r/min |
| Swing Drive | 2 compact planetary transmissions with axial piston motors |
| Parking Brake | Wet multiple-disc brake, spring-loaded/hydraulically released |
| Features (2) | All slew ring raceways and grease tub for internal gearing supplied by automatic, central lubrication system |
| Features (1) | Open swing circuit with auto slow down when joysticks in neutral |
| Track Pads - Each Side | 45 |
| Components (1) | Forged double-grouser track pads |
| Components (6) | Audible travel alarm |
| Bottom Rollers - Each Side | 8 |
| Travel Speed - 1st Stage - Maximum | 1.1 km/h |
| Components (4) | Fully hydraulic self-adjusting track tensioning system with accumulator |
| Components (5) | Automatic hydraulic retarder valve to prevent overspeed on downhill travel |
| Parking Brakes | Wet multiple disc brake, spring loaded/hydraulically released |
| Travel Speed - 2nd Stage - Maximum | 2.4 km/h |
| Gradeability - Travel Drives | Approximately 54% |
| Components (3) | All running surfaces of sprockets, idlers, rollers and track chain links hardened |
| Maximum Tractive Force | 1183 kN |
| Travel Drives - Each Side | 1 planetary transmission with 2 two-stage axial piston motors |
| Components (2) | Chain links connected by hardened pins and bushings |
| Support Rollers - Each Side | 3 |
| Type (3) | System condition and failures displayed by Board Control System |
| Capacity - Grease Barrel | 205 l |
| Type (1) | Single-circuit progressive system with hydraulically driven heavy-duty pump and electronic time control |
| Type (2) | Grease supplied to swing roller bearing, all pivot points of attachment, and swing gearbox bearing |
| Type (5) | Float valve for boom down function |
| Type (2) | High-tensile steel with solid steel castings at pivot areas |
| Type (3) | Boom and stick stress-relieved after welding |
| Type (1) | Boom and stick torsion-resistant with welded box design |
| Type (4) | Catwalks with rails at boom |
| Buckets Equipped With | – Special liner material covering main wear areas inside and outside<br>– Lip shrouds<br>– Wing shrouds<br>– Heel shrouds |
| Standard Track Pads | 800 mm |
| Operating Weight | 230200 kg |
| Ground Pressure | 22 N/cm² |
| Maximum Swing Oil Flow | 783 l/min |
| Maximum Pressure - Attachment | 310 bar |
| Filters (4) | Pressure filters (6 μm) for servo circuit |
| Electronic Pump Management Contains (3) | Automatic return of main pumps to zero flow |
| Features (2) | Cooling of pump transmission gear oil |
| Maximum Pressure - Travel | 310 bar |
| Maximum Pressure - Swing - Acceleration | 310 bar |
| Filters (3) | Full-flow filters (10 μm) for cooling return circuit |
| Electronic Pump Management Contains (2) | Dedicated circuit pump allocation |
| Maximum Total Oil Flow | 2350 l/min |
| Filters (2) | Full-flow filters (10 μm) for complete return circuit |
| Main Pumps | 6 × variable swash plate pumps |
| Filters (1) | Full-flow high-pressure filters (100 μm) for main pumps, installed directly behind each pump |
| Electronic Pump Management Contains (4) | Automatic rpm reduction of engine speed during working breaks |
| Filters (5) | Transmission oil filter (40 μm) |
| Electronic Pump Management Contains (5) | Reduced oil flow of main pumps at high hydraulic oil temperature and at high engine temperature |
| Electronic Pump Management Contains (1) | Electronic load limit control |
| Features (1) | Pressure cut-off function for all main pumps |
| Total Volume of Hydraulic Oil | 3500 l |
| Hydraulic Tank Capacity | 2800 l |
| Maximum Pressure - Swing - Deceleration | 350 bar |
| Equipped With (3) | Indicator light for hydraulic tank full |
| Equipped With (1) | Quick couplings for: – Diesel fuel<br>– Engine coolant<br>– Pump transmission gear oil<br>– Engine oil (oil pan)<br>– Hydraulic oil |
| Features | Centralized service area accessible from ground level. |
| Equipped With (2) | Cat jump-start socket |
| Maximum Tearout Force | 650 kN |
| Maximum Breakout Force | 730 kN |
| Maximum Digging Reach | 15.9 m |
| Maximum Digging Depth | 8.1 m |
| Maximum Digging Height | 13.9 m |
| Operating Weight | 230 t |
| Bucket Payload | 22 t |
| Standard Bucket Capacity - Backhoe (Heaped 1:1) | 12 m³ |
| Gross Power - SAE J1995 | 776 kW |
| Engine Model | Cat C32 ACERT |
| Net Power - SAE J1349 | 770 kW |
| Gross Power - SAE J1995 | 776 kW |
| Net Power - ISO 9249 | 774 kW |
| Net Power - SAE J1349 | 770 kW |
| Emissions | Meets China Nonroad Stage III emissions standards, equivalent to Tier 2 |
| Components (1) | Cat NOx reduction system |
| Components (7) | Two-stage fuel filter |
| Components (3) | MEUI™-C fuel system |
| Alternator | 275A |
| Bore | 145 mm |
| Components (4) | Hydraulically driven radiator fan with variable electronically controlled fan speed |
| No. of Cylinders | 12 |
| Displacement | 32 l |
| Fuel Tank Capacity | 3600 l |
| Components (5) | Micro processed engine management |
| Rated Speed | 1,800 min-1 (1,800 rpm) |
| Aspiration | Turbocharged and air-to-air aftercooled |
| Components (2) | Dual Diesel Oxidation Catalysts (DOCs) |
| Components (8) | Additional high-capacity water separator including electric priming pump |
| Components (9) | Large fuel tank allows for 24 hour machine operation |
| Components (6) | Heavy-duty air filters |
| Maximum Altitude without Deration | 2925 m (9,600 ft) – above sea level (a.s.l.) |
| Stroke | 162 mm |
| Make and Model | Cat C32 ACERT |
| Components (3) | Heavy-duty air filters |
| Components (4) | Two-stage fuel filter |
| Fuel Tank Capacity | 3600 l |
| No. of Cylinders | 12 |
| Components (2) | Micro processed engine management |
| Displacement | 32 l |
| Maximum Altitude without Deration | 3622 m (11,884 ft) – above sea level (a.s.l.) |
| Bore | 145 mm |
| Components (1) | Hydraulically driven radiator fan with variable electronically controlled fan speed |
| Stroke | 162 mm |
| Aspiration | Turbocharged and air-to-air aftercooled |
| Components (5) | Additional high-capacity water separator including electric priming pump |
| Rated Speed | 1800 min-1 (1,800 rpm) |
| Alternator | 275A |
| Make and Model | Cat C32 ACERT |
| Components (6) | Large fuel tank allows for 24 hour machine operation |
| Gross Power - SAE J1995 | 771 kW |
| Net Power - ISO 9249 | 764 kW |
| Net Power - SAE J1349 | 761 kW |
| Emissions | Meets Tier 4 Final and Stage V emissions standards |
| Net Power - SAE J1349 | 761 kW |
| Gross Power - SAE J1995 | 771 kW |
| Engine Model | Cat® C32 ACERT™ |
Advantages and Features
SAFETY
- Operator Protective Guard (Top Guard) certified cab with safety glass windshield.
- Excellent visibility thanks to cab position that provides clear view to the digging and loading areas, in-floor window that provides a view to the tracks, LED lighting, and optional camera monitoring system.
- Multiple emergency shut-off switches, including a pull switch accessible from the ground.
- Safer access and egress with wide anti-slip walkways, retractable 45-degree stairway and three means of egress for fast emergency exit.
- Safer service with lockable battery isolation and starter lockout switch, plus safe access to power module components from machine platform and counterweight.
OPERATOR CAB
- Quiet and fully pressurized cab with ergonomic operator seat and controls, superior insulation, extensive in-cab air distribution via powerful HVAC unit and multiple, optimally positioned vents.
- Easily accessible ergonomic joysticks with Electronic-Hydraulic Servo Control, which delivers dynamic and precise response and ensures no hydraulic lines are present in the cab.
- Greater controllability with ergonomic joystick controls and five circuit hydraulics that allow for two-cylinder motions, two travel motions, and swing to be controlled simultaneously.
- Enhanced training capability, with patented 3-seat design, elevated observer’s work station and easily dual in-cab emergency stop buttons.
- 10-inch high-definition color touchscreen display that includes troubleshooting aids and machine documentation.
RELIABILITY & DURABILITY
- Better wear of undercarriage components thanks to floating push tube, which delivers even idler slide wear and extended component life; low wear drive system via induction hardened and high quantity of sprocket teeth; and optional rough terrain undercarriage protection kit.
- Cat exclusive Positive Pin Retention 2 (PPR2) Track design, which resists pin walking and link cracking for reliable sealing and maximum track life.
- Structures designed and fabricated to withstand the toughest digging conditions, with high-strength steel; full penetration, profiled and ground welds at critical junctures; and booms and sticks that are stress-relieved after welding.
- Efficient Independent Oil Cooling system, which protects and extends the life of hydraulic components.
PRODUCTIVITY & PERFORMANCE
- Up to 25% greater efficiency through Hydraulic Optimization, which dynamically assigns individual pumps or groups of pumps to deliver the exact flow and pressure that each hydraulic function requires.
- Durable Cat C32 engine, which offers unsurpassed performance, high power output and proven reliability, and has been proven to withstand the challenging conditions found at mine sites across the globe.
- Engine optimized for low fuel consumption at 1,800 rpm and lower speeds, plus significant gains in fuel consumption through collaboration of engine and machine integration.
- Maximum uptime, without work interruption for regeneration, engine derate, or cold weather treatment of secondary fluid.
BUCKETS & GET
- Buckets and ground engaging tools (GET) designed to maximize durability and productivity and ideally matched to your shovel and application.
- Integrated to work as part of a machine system — helping you achieve high productivity and the lowest cost per ton.
- Variety of sizes and wear packages for the ideal match to your shovel and application.
- Four tip shapes of hammerless GET designed specifically for the 6020B, with no special tools required for removal and installation.
- Wear packages that protect your investment, including special liner material and lip shrouds, wing shrouds and heel shrouds.
CONNECTIVITY & TECHNOLOGY
- Greater connectivity with improved Product Link™ Elite system, which increases the availability of data provided by the 6020B and allows it to collect and transmit information into locally hosted or cloud-hosted applications such as Cat MineStar™ Solutions Health Office, Health Equipment Insights, or Equipment Care Advisor.
- Earliest possible detection of faults, with Board Control System that uses sensors throughout the machine to monitor operating data, record faults, and notify the operator audibly and visually.
- Factory-ready for Cat MineStar™ Solutions, with a range of capabilities that meet the needs of your fleet.
SERVICEABILITY
- Modular design that facilitates quick field assembly — as few as 14 days in typical condition.
- Exchangeable power module that can be quickly swapped out for a spare, then transported for repair in a safe, convenient and clean environment.
- Exceptional component accessibility and weather protection via first-in-class and spacious walk-through power module.
- Superior swing system component accessibility via boom-mounted hydraulic valve block, and ground-level accessible service fluid fill points and jump start receptacle.
- Simplified undercarriage serviceability, with automatic track tensioning system, which requires no manual adjustment; externally serviceable break; and PPR2 Tracks that are easily serviced with a master joint.
SUSTAINABILITY
- Highly regulated C32 engine certified to meet U.S. EPA Tier 4 Final/EU Stage V emissions standards without the need for DEF — saving time and cost during maintenance.
- Sound-suppressed power module to keep spectator sound levels low.
- Preservation of raw materials, energy conservation and reduced emissions through the Cat Reman and Cat Rebuild programs, which return end-of-life components to like-new condition.
Optional Equipment
-
SUPERSTRUCTURE
- Cold-weather package
- Lube fast fill port
-
CAB
- Redundant HVAC system
- Camera system
- Cat MineStar Health ready
-
UNDERCARRIAGE
- Rough terrain undercarriage protection kit including belly plate and rear plumbing guard
- Dirt scraper on swivel connection
- Track pad width 1000 mm (3 ft 3 in)
-
ATTACHMENT
- LED work lights on boom
-
BUCKETS
- Additional buckets available, based on application, through your local Cat dealer
