Cat Skid Steer Loaders: 216B3

Technicial Specifications

Engine

Gross Power - SAE J1995	— 51 hp 38 kW
Displacement	— 134 in³ 2.2 l
Stroke	— 3.9 in 100 mm
Bore	— 3.3 in 84 mm
Engine Model	— Cat C2.2 Cat C2.2
Net Power - SAE 1349/ISO 9249	— 47 hp 35 kW

Operating Specifications

Rated Operating Capacity	— 1400 lb 635 kg
Tipping Load	— 2800 lb 1270 kg
Breakout Force - Tilt Cylinder	— 4083 lb 1852 kg
Rated Operating Capacity with Optional Counterweight	— 1500 lb 680 kg
Note	— Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, OROPS, 1524 mm (60 in) dirt bucket, Cat 10×16.5 tires, no optional counterweights and manual quick coupler (unless otherwise noted). Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, OROPS, 1524 mm (60 in) dirt bucket, Cat 10×16.5 tires, no optional counterweights and manual quick coupler (unless otherwise noted).

Weights

Operating Weight	— 5690 lb 2581 kg
Note	— Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, OROPS, 1524 mm (60 in) dirt bucket, Cat 10×16.5 tires, no optional counterweights and manual quick coupler (unless otherwise noted). Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, OROPS, 1524 mm (60 in) dirt bucket, Cat 10×16.5 tires, no optional counterweights and manual quick coupler (unless otherwise noted).

Dimensions

Wheel Base	— 39 in 986 mm
Length - With Bucket on Ground	— 127 in 3233 mm
Length - Without Bucket	— 99 in 2519 mm
Height - Top of Cab	— 77 in 1950 mm
Vehicle Width over Tires	— 60 in 1525 mm
Ground Clearance	— 8 in 195 mm
Departure Angle	— 26° 26°
Maximum Dump Angle	— 40° 40°
Bucket Pin Height - Maximum Lift	— 112 in 2854 mm
Reach - Maximum Lift/Dump	— 20 in 505 mm
Turn Radius from Center - Machine Rear	— 59 in 1502 mm
Bucket Pin Height - Carry Position	— 8 in 200 mm
Bumper Overhang - Behind Rear Axle	— 38 in 967 mm
Turn Radius from Center - Bucket	— 77 in 1944 mm
Turn Radius from Center - Coupler	— 47 in 1195 mm
Maximum Reach with Arms Parallel to Ground	— 51 in 1291 mm
Clearance at Maximum Lift and Dump	— 85.4 in 2169 mm
Maximum Overall Height	— 146 in 3709 mm
Note	— Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, OROPS, 1524 mm (60 in) dirt bucket, Cat 10×16.5 tires, no optional counterweights and manual quick coupler (unless otherwise noted). Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, OROPS, 1524 mm (60 in) dirt bucket, Cat 10×16.5 tires, no optional counterweights and manual quick coupler (unless otherwise noted).
Rack Back Angle - Maximum Height	— 81° 81°

Cab

ROPS	— SAE J1040 MAY94, ISO 3471:1994 SAE J1040 MAY94, ISO 3471:1994
FOPS	— SAE J/ISO 3449 APR98 Level I, ISO 3449:1992 Level I SAE J/ISO 3449 APR98 Level I, ISO 3449:1992 Level I
FOPS Level II	— SAE J/ISO 3449 APR98 Level II, ISO 3449:1992 Level II (optional) SAE J/ISO 3449 APR98 Level II, ISO 3449:1992 Level II (optional)

Service Refill Capacities

Chain Box - Each Side	— 1.6 gal (US) 6 l
Cooling System	— 2.6 gal (US) 10 l
Engine Crankcase	— 2.6 gal (US) 10 l
Fuel Tank	— 15.4 gal (US) 58 l
Hydraulic System	— 14.5 gal (US) 55 l
Hydraulic Tank	— 9.2 gal (US) 35 l

Hydraulic System

Hydraulic Flow - Standard - Hydraulic Power (Calculated)	— 31.1 hp 23.2 kW
Hydraulic Flow - Standard - Loader Hydraulic Pressure	— 3335 psi 23000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow	— 16 gal/min 61 l/min

Power Train

Travel Speed - Forward or Reverse	— 7.9 mile/h 12.7 km/h

Ergonomic Operator Station

Ergonomic operator station features easy to use pilot operated joystick controls for reduced operator fatigue and increased productivity.

High Performance Power Train

High performance power train provides high engine horsepower and torque, allowing part-throttle operation for lower sound levels and fuel consumption.

Advanced Hydraulic System

Advanced hydraulic system is designed for maximum power and reliability.

Easy Maintenance

Easy routine maintenance helps reduce machine downtime for greater productivity.

Cat Work Tools

Broad range of performance matched Cat Work Tools make the Cat Skid Steer Loader the most versatile machine on the job site.

Standard Equipment

ELECTRICAL
- 12 volt Electrical System
- 65 ampere Alternator
- Automatic Glow Plug Activation
- Ignition Key Start/Stop Switch
- Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light

OPERATOR ENVIRONMENT
- Gauges: Fuel Level, Hour Meter
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged
- Vinyl Seat
- Pull Down Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Open, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Interior Rearview Mirror
- 12 volt Electric Socket
- Horn
- Backup Alarm

POWER TRAIN
- Cat C2.2 Diesel Engine
- Meets EU Stage IIIA equivalent and Bharat Stage III emission standards
- Air Cleaner, Dual Element, Radial Seal
- S·O·SSM Sampling Valve, Hydraulic Oil
- Filters: Spin on, Hydraulic
- Filters: Bayonet-type, Fuel and Water Separator
- Tilt Up Radiator/Hydraulic Oil Cooler
- Muffler, Standard
- Spring Applied, Hydraulically Released Parking Brakes
- Hydrostatic Transmission
- Four Wheel Chain Drive

OTHER
- Engine Enclosure, Lockable
- Extended Life Antifreeze, –36° C (–33° F)
- Machine Tie Down Points (4)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator Coolant Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
- Product Link™ PL240, Cellular

MANDATORY EQUIPMENT
- Quick Coupler, Mechanical or Hydraulic
- Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- Comfort Packages (must select one of the following):
  – Open ROPS (C0): Static Seat
  – Open ROPS (C1): Suspension Seat, Deluxe Headliner
  – Enclosed ROPS (C3): Suspension Seat, Deluxe Headliner, Heater, Air Conditioner, Cab Door, Side Windows, Cup Holder, Cab Debris Barrier
- Control Packages (must select one of the following):
  – Control Package 1: On/Off Auxiliary Hydraulics Basic
  – Control Package 2: Proportional Auxiliary Hydraulics Deluxe
  – Control Package 3: Proportional Auxiliary Hydraulics Deluxe, Work Tool Harness

Optional Equipment

OPTIONAL EQUIPMENT
- Counterweight, increases rated operating capacity 45 kg (100 lb)
- Beacon, Rotating
- Engine Block Heater – 120V or 240V
- Oil, Hydraulic, Cold Operation
- Heavy Duty Battery, 880 CCA

Augers

Dig postholes, footings, shrub and tree plantings easily and efficiently.

Model	DRIVE SHAFT TORQUE AT MAXIMUM PRESSURE	DRIVE METHOD	MOUNTING BRACKET DESIGN
A23	1699.3 lb/ft - 2304 N·m	Gerotor Motor - Direct Drive	Skid Steer Loader Coupler
A41	3037.3 lb/ft - 4118 N·m	Gerotor Motor - Single Planetary Reduction	Skid Steer Loader Coupler

Blades

Cat® Blades efficiently doze, plow and move material. Specialized designs mean the perfect match for every job.

Model	BLADE WIDTH	WIDTH - FULLY ANGLED	MAXIMUM BLADE ANGLE - RIGHT/LEFT OF CENTER
1829 mm (72 in)	72 in - 1829 mm	66.3 in - 1685 mm	30 degrees
2134 mm (84 in)	84 in - 2134 mm	76.7 in - 1949 mm	30 degrees
2007 mm (79 in)	79 in - 2007 mm	68.9 in - 1750 mm	30 degrees
2337 mm (92 in)	92 in - 2337 mm	80.7 in - 2049 mm	30 degrees

Brooms

Cat® Hydraulic Brooms are available in a variety of configurations to match any ground-clearing job.

Model	OVERALL WIDTH	SWEEPING WIDTH	BRUSH DIAMETER
BA118C Manual	104 in - 2637 mm	83 in - 2119 mm	32 in - 815 mm
BP115C	78.3 in - 1990 mm	60 in - 1524 mm	26 in - 660 mm
BA118C Hydraulic	104 in - 2637 mm	83 in - 2119 mm	32 in - 815 mm

Buckets - Skid Steer Loader

Cat® provides a comprehensive line of machine-matched buckets for Cat Skid Steer Loaders and Compact Track Loaders.

Model	WIDTH	CAPACITY	WEIGHT
1576 mm (62 in), Bolt-On Teeth	62 in - 1576 mm	0.47 yd³ - 0.36 m³	407.9 lb - 185 kg
1576 mm (62 in), Bolt-On Cutting Edge	62 in - 1576 mm	0.47 yd³ - 0.36 m³	440.9 lb - 200 kg
1730 mm (68 in), Bolt-On Cutting Edge	68.1 in - 1730 mm	0.52 yd³ - 0.4 m³	551.2 lb - 250 kg
1730 mm (68 in), Bolt-On Teeth	68.1 in - 1730 mm	0.52 yd³ - 0.4 m³	509.3 lb - 231 kg
1883 mm (74 in), Bolt-On Cutting Edge	74.1 in - 1883 mm	0.58 yd³ - 0.44 m³	597.5 lb - 271 kg
1883 mm (74 in), Bolt-On Teeth	74.1 in - 1883 mm	0.58 yd³ - 0.44 m³	549 lb - 249 kg
2036 mm (80 in), Bolt-On Cutting Edge	80.2 in - 2036 mm	0.63 yd³ - 0.48 m³	630.5 lb - 286 kg
2036 mm (80 in), Bolt-On Teeth	80.2 in - 2036 mm	0.63 yd³ - 0.48 m³	582 lb - 264 kg
2188 mm (86 in), Bolt-On Cutting Edge	86.1 in - 2188 mm	0.82 yd³ - 0.63 m³	723.1 lb - 328 kg
2188 mm (86 in), Bolt-On Teeth	86.1 in - 2188 mm	0.82 yd³ - 0.63 m³	670.2 lb - 304 kg
1576 mm (62 in), Bolt-On Cutting Edge	62 in - 1576 mm	1062.6 lb - 482 kg	20.7 in - 525 mm
1730 mm (68 in), Bolt-On Cutting Edge	68.1 in - 1730 mm	1111.1 lb - 504 kg	20.7 in - 525 mm
1883 mm (74 in), Bolt-On Cutting Edge	74.1 in - 1883 mm	1159.6 lb - 526 kg	20.7 in - 525 mm
2036 mm (80 in), Bolt-On Cutting Edge	80.2 in - 2036 mm	1201.5 lb - 545 kg	20.7 in - 525 mm
1883 mm (74 in), Bolt-On Cutting Edge	74.1 in - 1883 mm	0.9 yd³ - 0.69 m³	666 lb - 302 kg
2036 mm (80 in), Bolt-On Cutting Edge	80.2 in - 2036 mm	0.98 yd³ - 0.75 m³	706 lb - 320 kg
2185 mm (86 in), Bolt-On Cutting Edge	86 in - 2185 mm	1.1 yd³ - 0.84 m³	747 lb - 339 kg
2490 mm (98 in), Bolt-On Cutting Edge	98 in - 2490 mm	1.22 yd³ - 0.93 m³	822 lb - 373 kg
1421 mm (56 in), Bolt-On Cutting Edge	56 in - 1421 mm	0.39 yd³ - 0.3 m³	392 lb - 178 kg
1576 mm (62 in), Bolt-On Cutting Edge	62 in - 1586 mm	0.44 yd³ - 0.34 m³	452 lb - 205 kg
1730 mm (68 in), Bolt-On Cutting Edge	68 in - 1740 mm	0.48 yd³ - 0.37 m³	512 lb - 232 kg
1883 mm (74 in), Bolt-On Cutting Edge	74 in - 1893 mm	0.54 yd³ - 0.41 m³	547 lb - 248 kg
2036 mm (80 in), Bolt-On Cutting Edge	80 in - 2045 mm	0.58 yd³ - 0.44 m³	584 lb - 265 kg
2185 mm (86 in), Bolt-On Cutting Edge	86 in - 2185 mm	1.4 yd³ - 1.07 m³	805 lb - 365 kg
2490 mm (98 in), Bolt-On Cutting Edge	98 in - 2490 mm	1.63 yd³ - 1.25 m³	882 lb - 400 kg
2642 mm (104 in), Bolt-On Cutting Edge	104 in - 2642 mm	1.74 yd³ - 1.33 m³	922 lb - 418 kg
MB200	0.26 yd³ - 0.2 m³	54.6 in - 1386 mm	Standard Flow
1576 mm (62 in) w/Spill Guard, Bolt-On Cutting Edge	62 in - 1576 mm	0.39 yd³ - 0.3 m³	851 lb - 386 kg
1576 mm (62 in) w/Spill Guard, Bolt-On Teeth	62 in - 1576 mm	0.39 yd³ - 0.3 m³	817.9 lb - 371 kg
1730 mm (68 in) w/Spill Guard, Bolt-On Cutting Edge	68.1 in - 1730 mm	0.44 yd³ - 0.34 m³	906 lb - 411 kg
1730 mm (68 in) w/Spill Guard, Bolt-On Teeth	68.1 in - 1730 mm	0.44 yd³ - 0.34 m³	868.6 lb - 394 kg
1883 mm (74 in) w/Spill Guard, Bolt-On Cutting Edge	74.1 in - 1883 mm	0.48 ft³ - 0.37 m³	961 lb - 436 kg
1883 mm (74 in) w/Spill Guard, Bolt-On Teeth	74.1 in - 1883 mm	0.48 yd³ - 0.37 m³	917.1 lb - 416 kg
2036 mm (80 in) w/Spill Guard, Bolt-On Cutting Edge	80.2 in - 2036 mm	0.52 ft³ - 0.4 l	1016 lb - 461 kg
2036 mm (80 in) w/Spill Guard, Bolt-On Teeth	80.2 in - 2036 mm	0.52 yd³ - 0.4 m³	970 lb - 440 kg
2188 mm (86 in) w/Spill Guard, Bolt-On Cutting Edge	86.1 in - 2188 mm	0.56 yd³ - 0.43 m³	1071 lb - 486 kg
2188 mm (86 in) w/Spill Guard, Bolt-On Teeth	86.1 in - 2188 mm	0.56 yd³ - 0.43 m³	1018.5 lb - 462 kg
1576 mm (62 in), Bolt-On Cutting Edge	62 in - 1576 mm	0.56 yd³ - 0.43 m³	529 lb - 240 kg
1730 mm (68 in), Bolt-On Cutting Edge	68.1 in - 1730 mm	0.63 yd³ - 0.48 m³	569 lb - 258 kg
1883 mm (74 in), Bolt-On Cutting Edge	74.1 in - 1883 mm	0.68 yd³ - 0.52 m³	609 lb - 276 kg
1730 mm (68 in)	68.1 in - 1730 mm	29.1 in - 739 mm	35.5 in - 902 mm
1883 mm (74 in)	74.1 in - 1883 mm	29.1 in - 739 mm	35.5 in - 902 mm

Compactors

Compactors are specifically designed for all compaction operations.

Model	DRUM WIDTH	WEIGHT	REQUIRED HYDRAULICS
CV117	66 in - 1676 mm	2063.5 lb - 936 kg	Standard Flow

Material Handling

Material handling attachments provide Skid Steer Loader, Backhoe Loader, Telehandler, and Wheel Loader machines with a utility tool useful in road construction, pipe laying and other contracting jobs.

Model	OVERALL WIDTH	MAXIMUM LOAD RATING	MAXIMUM HORIZONTAL REACH
Material Handling Arm	51.8 in - 1316 mm	1999.6 lb - 907 kg	84 in - 2134 mm

Rakes

Rakes are versatile work tools for land clearing, brush piling and site preparation.

Model	WIDTH	HEIGHT	WEIGHT
1829 mm (72 in)	72 in - 1829 mm	33 in - 838 mm	1069.9 lb - 485.29 kg
2137 mm (84 in)	84 in - 2134 mm	33 in - 838 mm	1115.1 lb - 505.79 kg
LR116	62 in - 1576 mm	0.4 yd³ - 0.31 m³	1311.7 lb - 595 kg

Tillers

Landscape Tillers break up and mix soil in landscaping applications.

Model	WORKING WIDTH	WORKING DEPTH	WEIGHT
LT114	53.3 in - 1354 mm	25-152 mm (1-6 in)	925.9 lb - 420 kg

Trenchers

Trenchers are designed for cutting narrow, straight trenches.

Model	STANDARD BOOM LENGTH	CUTTING WIDTH	CHAIN TYPE
T109 Hydraulic Side Shift	36 in - 914 mm	6 in - 152 mm	Rockfrost
T109 Hydraulic Side Shift	36 in - 914 mm	8 in - 203 mm	Standard
T109 Hydraulic Side Shift	36 in - 914 mm	6 in - 152 mm	Standard
T112 Hydraulic Side Shift	48 in - 1219 mm	6 in - 152 mm	Standard
T109 Hydraulic Side Shift	36 in - 914 mm	6 in - 152 mm	Terminator
T109 Hydraulic Side Shift	36 in - 914 mm	6 in - 152 mm	Combo
T109 Manual Side Shift	36 in - 914 mm	6 in - 152 mm	Combo
T109 Manual Side Shift	36 in - 914 mm	6 in - 152 mm	Terminator
T109 Manual Side Shift	36 in - 914 mm	6 in - 152 mm	Rockfrost
T109 Manual Side Shift	36 in - 914 mm	6 in - 152 mm	Standard
T109 Manual Side Shift	36 in - 914 mm	8 in - 203 mm	Standard
T112 Hydraulic Side Shift	48 in - 1219 mm	8 in - 203 mm	Standard
T112 Hydraulic Side Shift	48 in - 1219 mm	6 in - 152 mm	Rockfrost
T112 Hydraulic Side Shift	48 in - 1219 mm	6 in - 152 mm	Combo
T112 Manual Side Shift	48 in - 1219 mm	6 in - 152 mm	Combo
T112 Manual Side Shift	48 in - 1219 mm	6 in - 152 mm	Standard
T112 Manual Side Shift	48 in - 1219 mm	6 in - 152 mm	Rockfrost

Snow Products

Cat® Snow Products handle the toughest snow removal jobs.

Model	WORKING WIDTH	WEIGHT	LENGTH
2.44 m (8 ft)	96 in - 2438 mm	778.2 lb - 353 kg	43.7 in - 1109 mm
3.05 m (10 ft)	120 in - 3048 mm	866.4 lb - 393 kg	43.7 in - 1109 mm
3.66 m (12 ft)	144 in - 3658 mm	952.4 lb - 432 kg	43.7 in - 1109 mm
2.44 m (8 ft)	96 in - 2438 mm	1082.5 lb - 491 kg	45 in - 1143 mm
2.44 m (8 ft)	96 in - 2438 mm	1036.2 lb - 470 kg	45 in - 1143 mm
3.05 m (10 ft)	120 in - 3048 mm	1153 lb - 523 kg	45 in - 1143 mm
3.05 m (10 ft)	120 in - 3048 mm	1201.5 lb - 545 kg	45 in - 1143 mm
3.66 m (12 ft)	144 in - 3658 mm	1347 lb - 611 kg	45 in - 1143 mm
3.66 m (12 ft)	144 in - 3658 mm	1402.1 lb - 636 kg	45 in - 1143 mm

Stump Grinders

Remove stumps in a wide variety of applications.

Model	REQUIRED HYDRAULICS	CUTTING WHEEL DIAMETER - WITH TEETH	CUTTING DEPTH - BELOW GROUND
SG16	Standard Flow	21.5 in - 547 mm	20.5 in - 521 mm

Mulchers

Mulchers are ideal for efficient cutting and mulching of vegetation and overgrowth.

Model	OVERALL WIDTH	WORKING WIDTH	LENGTH
HM112	59.8 in - 1518 mm	48.8 in - 1240 mm	48 in - 1219 mm

Bale Spears

Cat® Bale Spears are ideal for hay bales, both round and square as well as other baled material in agriculture applications..

Model	OVERALL WIDTH	OVERALL HEIGHT	CAPACITY
890 mm (35 in)	50.6 in - 1285 mm	22.4 in - 570 mm	2004 lb - 909 kg
890 mm (35 in)	55.4 in - 1407 mm	51.8 in - 1315 mm	3007.1 lb - 1364 kg
1140 mm (45 in)	50.6 in - 1285 mm	22.4 in - 570 mm	2004 lb - 909 kg
1140 mm (45 in)	55.4 in - 1407 mm	51.8 in - 1315 mm	3007.1 lb - 1364 kg

Bale Grabs

Cat® Bale Grabs safely grab and carry square or round baled material.

Model	OVERALL WIDTH	OVERALL HEIGHT	MAXIMUM OPENING WIDTH
1803 mm (71 in)	55.2 in - 1401 mm	34.4 in - 873 mm	71 in - 1803 mm
2133 mm (84 in)	55.2 in - 1401 mm	34.4 in - 873 mm	84 in - 2133 mm

Forks

Cat® forks are the ideal choice for a wide variety of applications.

Model	WIDTH	HEIGHT - GRAPPLES CLOSED	JAW OPENING
1676 mm (66 in)	66 in - 1676 mm	31.9 in - 810 mm	38 in - 965 mm
1829 mm (72 in)	72 in - 1829 mm	32 in - 814 mm	38 in - 965 mm
1676 mm (66 in)	66 in - 1676 mm	22.9 in - 581 mm	436.5 lb - 198 kg
1829 mm (72 in)	72 in - 1829 mm	22.9 in - 581 mm	485 lb - 220 kg
1676 mm (66 in)	66 in - 1676 mm	30.3 in - 770 mm	34.5 in - 876 mm
1829 mm (72 in)	72 in - 1829 mm	30.3 in - 770 mm	34.5 in - 876 mm
1160 mm (46 in)	35.9 in - 912 mm	46 in - 1160 mm	49.9 in - 1268 mm

Cat Skid Steer Loaders: 216B3

216B3

216B3

Technicial Specifications

Technicial Specifications

Advantages and Features

Advantages and Features

Ergonomic Operator Station

High Performance Power Train

Advanced Hydraulic System

Easy Maintenance

Cat Work Tools

Equipment

Standard Equipment

Optional Equipment

Documents

216B3 Small Product Brochure

relation_products

Augers

Blades

Brooms

Buckets - Skid Steer Loader

Compactors

Material Handling

Rakes

Tillers

Trenchers

Snow Products

Stump Grinders

Mulchers

Bale Spears

Bale Grabs

Forks

Gross Power - SAE J1995	51 hp	38 kW
Rated Operating Capacity	1400 lb	635 kg
Operating Weight	5690 lb	2581 kg