Technicial Specifications
| Engine Model | Cat® C15 Cat® C15 |
| Rated Speed | 2000 2000 |
| Peak Power Speed | 1600 1600 |
| Engine Power - ISO 14396 | 449 hp 335 kW |
| Gross Power - SAE J1995 | 456 hp 340 kW |
| Net Power - SAE J1349 | 373 hp 278 kW |
| Emissions | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 |
| Bore | 5.4 in 137 mm |
| Stroke | 6.75 in 171.5 mm |
| Displacement | 927 in³ 15.2 l |
| Peak Torque - 1,200 rpm - SAE J1995 | 1778 ft·lbf 2411 N·m |
| Torque Rise | 16% 16% |
| Operating Weight | 116858 lb 53006 kg |
| Rated Payload - Quarry Face | 12.5 ton (US) 11.3 t |
| Bucket Capacity Range | 6.4-7.6 m3 (8.3-10 yd3) 6.4-7.6 m3 (8.3-10 yd3) |
| Cat Truck Match - High Lift | 772/773/775 772/773/775 |
| Transmission Type | Cat planetary power shift Cat planetary power shift |
| Forward - 1 | 5 mile/h 7.3 km/h |
| Forward - 2 | 8 mile/h 12.2 km/h |
| Reverse - 1 | 5 mile/h 7.6 km/h |
| Reverse - 2 | 8 mile/h 13.6 km/h |
| Direct Drive - Forward 1 | Lock-up disabled Lock-up disabled |
| Direct Drive - Forward 2 | 8 mile/h 12.7 km/h |
| Direct Drive - Forward 3 | 14 mile/h 22 km/h |
| Direct Drive - Forward 4 | 24 mile/h 39 km/h |
| Direct Drive - Reverse 1 | Lock-up disabled Lock-up disabled |
| Direct Drive - Reverse 2 | 9 mile/h 14.1 km/h |
| Direct Drive - Reverse 3 | 16 mile/h 25 km/h |
| Direct Drive - Reverse 4 | 25.4 mile/h 40.8 km/h |
| Lift/Tilt System - Circuit | EH - Load Sense EH - Load Sense |
| Lift/Tilt System | 2X x 145 cc Variable displacement piston 2X x 145 cc Variable displacement piston |
| Maximum Flow at 2,165 rpm | 159 gal/min 600 l/min |
| Relief Valve Setting - Lift/Tilt | 4598 psi 31700 kPa |
| Cylinders, Double Acting - Lift, Bore and Stroke | 190 mm x 1216 mm (7.5 in x 48 in) 190 mm x 1216 mm (7.5 in x 48 in) |
| Cylinders, Double Acting - Tilt, Bore and Stroke | 170 mm x 722 mm (6.7 in x 28.4 in) 170 mm x 722 mm (6.7 in x 28.4 in) |
| Pilot System | Variable displacement piston Variable displacement piston |
| Tilt Cylinder - Stroke | 27 in 685 mm |
| Rack Back | 3.8 s 3.8 s |
| Raise | 7.5 s 7.5 s |
| Dump | 3 s 3 s |
| Lower Float Down | 4.6 s 4.6 s |
| Total Hydraulic Cycle Time - Empty Bucket | 18.9 s 18.9 s |
| Steering System - Circuit | Pilot, load sensing Pilot, load sensing |
| Steering System - Pump | Piston, variable displacement Piston, variable displacement |
| Maximum Flow | 52 gal (US) 200 l/min |
| Relief Valve Setting - Steering | 4000 psi 27600 kPa |
| Total Steering Angle | 70° 70° |
| Steering Cycle Times - High Idle | 3 s 3 s |
| Steering Cycle Times - Low Idle | 5.2 s 5.2 s |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
| Front | Fixed Fixed |
| Rear | Trunnion Trunnion |
| Oscillation Angle | +/-12.5° +/-12.5° |
| Brakes | ISO 3450:2011 ISO 3450:2011 |
| ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
| Fuel Tank | 141 gal (US) 535 l |
| Cooling System | 27 gal (US) 101 l |
| Engine Crankcase | 9 gal (US) 34 l |
| Diesel Exhaust Fluid Tank | 5.5 gal (US) 21 l |
| Transmission | 20 gal (US) 75 l |
| Differential - Final Drives - Front | 49 gal (US) 186 l |
| Differential - Final Drives - Rear | 45 gal (US) 170 l |
| Note | Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester)* - 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. **For use of blends higher than 20% biodiesel, consult your Cat dealer Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester)* - 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. **For use of blends higher than 20% biodiesel, consult your Cat dealer |
| Operator Sound Level (ISO 6396) | 72 dB(A) 72 dB(A) |
| Machine Sound Level (ISO 6395) | 110 dB(A) 110 dB(A) |
| Note (1) | The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (2) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Note (3) | The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Ground to Top of ROPS | 13.5 ft 4100 mm |
| Ground to Top of Exhaust Stacks | 13.3 ft 4060 mm |
| Ground to Top of Hood | 10.7 ft 3270 mm |
| Rear Axle - Centerline to Bumper | 10.3 ft 3132 mm |
| Front Axle Centerline to Bucket Tip | 15.7 ft 4773 mm |
| Wheel Base | 12.5 ft 3810 mm |
| Maximum Overall Length | 39.5 ft 12042 mm |
| Ground to Lower Hitch Clearance | 1.5 ft 459 mm |
| Clearance at Maximum Lift | 12 ft 3732 mm |
| B-Pin Height - Maximum Lift | 18.7 ft 5755 mm |
| Maximum Overall Height - Bucket Raised | 25 ft 7582 mm |
| Reach - Maximum Lift | 7.7 ft 2342 mm |
| Note | Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. |
| Bucket Capacities | 6.4-7.6 m3 (8.3-10 yd3) 6.4-7.6 m3 (8.3-10 yd3) |
| Recyclability | 96% 96% |
Advantages and Features
PROVEN RELIABILITY
Proven Reliability
- Cat C15 engine is built and tested to meet your most demanding applications.
- Cat torque converter with lock-up clutch eliminates torque converter losses and lowers system heat.
- Maximum responsiveness with Steering and Integrated Control (STIC™).
- Moves more material more efficiently with improved power and control.
- Transmission neutralizer pedal extends service brake life and allows full power during stationary loading.
- Mechanically Actuated Electronic Unit Injection (MEUI™) fuel system and Advanced Diesel Engine Management (ADEM™) A5 electronic control module manage fuel delivery for optimum performance and quick engine response.
LONG TERM VALUE AND DURABILITY
Durability
- Best-in-class transmission for long life and consistent, smooth shifting; specifically designed for mining applications.
- Advanced Productivity Electronic Control Shifting (APECS) transmission controls for greater momentum on grades.
- Positive Flow Control (PFC) hydraulic system increases efficiency, bucket feel, and responsiveness with consistent performance.
- Advanced filtration system for extended performance and reliability of the hydraulic system.
- Impeller Clutch Torque Converter (ICTC) minimizes tire spin by allowing torque to adjust to underfoot conditions.
- Advanced filtration system for extended performance and reliability of the hydraulic system.
ACHIEVE GREATER PRODUCTIVITY
Achieve Productivity Targets
- Optimum 50-ton truck match loader.
- Dump clearance designed for efficient truck loading up to 775G.
- Improved visibility over the top of the linkage.
- Rated payload aligned with 988K.
- Convenient, responsive electro-hydraulic controls increase operator productivity.
- Integrated steering and transmission controls.
POWERFUL EFFICIENCY
Superior Fuel Efficiency
- Up to 5% less fuel consumption than the 988K.
- Flow sharing hydraulics for full flow at reduced engine rpm.
- Fully integrated electronic engine controls make your fuel go farther.
- Engine Idle Shutdown for less fuel used while idling.
PRODUCTIVITY WITH TECHNOLOGY
Increase Productivity and Efficiency with Integrated Technologies
- Cat Technologies developed to monitor, manage, and enhance your jobsite operations.
- Cat Payload ready provides accurate weighing* of the materials you are loading and hauling. Payload data is displayed in real-time to improve productivity and reduce overloading.
- Optional Cat Detect enhances awareness of the environment around working equipment and provides alerts to help keep people and assets safe on the jobsite.
- Product Link™ wirelessly connects you to your equipment, giving you access to essential information you need to know to run your business. Gain valuable insight into how your machine or fleet is performing.
- Optional Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.
- Standard work tool recognition provides awareness of bucket install.
SAFETY FIRST
Safety Features
- Achieve precise positioning for easy loading in tight areas with 43 degrees of steering articulation.
- Precise machine control by load-sensing hydraulic steering system.
- Standard LED lights for improved visibility.
- Optional left- and right-hand stairs with 45-degree angle.
- Computerized monitoring system with warning indicators.
- Standard rear Cat Vision enhances visibility behind the machine, helping you work safely and confidently.
- Pressurized cabin with filtered air and reduced sound levels.
SAVE ON SERVICE AND MAINTENANCE
Reduced Maintenance Time and Costs
- Up to 25% lower maintenance costs than the 988K.
- Grouped service points provide easy access to critical daily service checks.
- Electro-hydraulic controls.
- Swing-out engine compartment service doors.
- Reduced waste with maintenance-free batteries.
- Ecology drains to prevent spilled contaminants and allow for easier service.
- Vehicle Information Management System (VIMS™) notifications to resolve problems before failure.
- Ground level access to transmission control valves.
OPERATOR COMFORT AND CONTROL
Easy, Comfortable Operator Environment
- Best-in-class operator comfort and ergonomics.
- Comfort Series III seats with extra thick, contoured cushions provide total comfort throughout the workday.
- Easy-to-reach levers and seat-mounted implement pod to reduce fatigue.
- Ergonomic switch placement and displays with large, backlit switches and LED indicators.
- Two-position rocker switch activates the electro hydraulic parking brake.
- Reduced vibrations from isolated cab mounts and seat air suspension.
- Automatic cab temperature controls.
- Up to 47% quieter STIC steering significantly reduces operator sound levels.
SUSTAINABILITY
Sustainability
- The Cat® C15 engine is available in configurations that meet U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards or Brazil MAR-1 and China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
- The 988 GC emits up to 5% less CO2/hr than the 988K.
- Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels
- Cat engines meeting Brazil MAR-1 and China Nonroad Stage III, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, are compatible with diesel fuel blended with the following lower-carbon intensity fuels up to: 100% biodiesel FAME (fatty acid methyl ester)** or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Engine Idle Management System and Auto Engine Idle Shutdown reduces idle RPM and maximize fuel efficiency.
- Load sensing hydraulics produce flow and pressure on-demand and only in amounts necessary to perform the needed functions.
- Cat Payload technology maximizes loading efficiency, helping operators of every skill level work more accurately to reduce load time, fuel costs and greenhouse gas emissions.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Optional Cat clean emissions module includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Selective Catalytic Reduction (SCR) technologies to reduce the engine’s emissions.
Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
ELECTRICAL
- Alarm, back-up
- Alternator, single 145 amp
- Batteries, dry
- Converter, 10/15 amp, 24V to 12V
- Lighting system (LED, work lights, access and service platform lighting)
- Starting and charging system, 24V
- Starter emergency start receptacle
- Transmission lockout in bumper
- Hazardous voltage lamp
-
OPERATOR ENVIRONMENT
- Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Cat Vision, rear vision camera system
- Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12‑volt 5-amp) and power port
- Controls, lift and tilt function
- Heater, defroster
- Horn, electric
-
Instrumentation, gauges
– Coolant temperature
– Engine hour meter
– Hydraulic oil temperature
– Power train oil temperature
- Light, cab, dome
- Lunchbox, beverage holders
- CB radio-ready
- Mirrors, rearview (externally mounted)
- Seat, Cat Comfort Cloth, air suspension, six-way adjustable
- Seat belt minder
- Seat belt, retractable, 76 mm (3 in) wide
- STIC Control System
- UV glass
- Virtual gear indicator
-
Wet-Arm wipers/washers (front and rear)
– Intermittent front and rear wipers
- Lights, directional
-
POWER TRAIN
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain screens
- Electro hydraulic parking brake
- Engine, C15 MEUI diesel, turbocharged/aftercooled
- Ground level engine shutoff
- Turbine precleaner, engine air intake
- Starting aid, ether, automatic
- Throttle lock, electronic
- Manual switch and automatic fuel priming
- Cat Production Measurement ready
- Cat SR Generator/Pump Drive
- Cat SR Drive Motor
- Cat Integrated Powered Electronics
- Automatic retarding controls
-
ADDITIONAL EQUIPMENT
- Automatic bucket lift kickout/positioner
- Base machine price includes a rim allowance
- Hydraulically driven demand fan
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Ecology drains for engine, radiator, hydraulic tank
- Fuel tank, 535 L (141 gal)
- Hoses, Cat XT™
- Hydraulic, steering and brake filtration/screening system
- Cat Clean Emission Module
- Oil sampling valves
- Premixed 50 percent concentration of extended life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Steering, load sensing
- Toe kicks
- Vandalism protection caplocks
Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
POWER TRAIN
- High ambient cooling – software
- Optional Cat Production Measurement
- Optional Engine brake
- Crankcase guard
-
OPERATOR ENVIRONMENT
- Cab precleaner
- Cat Detect, object detection system
- AM/FM radio
-
ADDITIONAL EQUIPMENT
- Front and rear roading fenders
- Cold Weather Starting
- Autolube
