Technicial Specifications
Power Range | 1340-2366 bhp (1000-1765 bkW) 1340-2366 bhp (1000-1765 bkW) |
Speed Range | 1600-1800 rpm 1600-1800 rpm |
Emissions | EPA Tier 3, IMO II EPA Tier 3, IMO II |
Aspiration | TTA TTA |
Bore | 6.69 in 170 mm |
Stroke | 8.46 in 215 mm |
Displacement | 3574 in³ 58.6 l |
Rotation from Flywheel End | Counterclockwise or Clockwise Counterclockwise or Clockwise |
Configuration | Vee 12, 4-Stroke-Cycle Diesel Vee 12, 4-Stroke-Cycle Diesel |
Minimum Dry Weight | 16508 lb 7488 kg |
Minimum Length | 104.2 in 2465 mm |
Maximum Length | 104.2 in 2465 mm |
Minimum Height | 87.5 in 2222.6 mm |
Maximum Height | 87.5 in 2222.6 mm |
Minimum Width | 80.2 in 2037 mm |
Maximum Width | 80.2 in 2037 mm |
Advantages and Features
Making Your Investment Work Harder
Uses advanced predictive modeling software to select best nozzle configurations and combustion cylinder geometry, Stainless steel exhaust manifold and turbo heat shields, Closed crankcase ventilation system, Dual camshafts, Reduced aftercooler heat load for smaller heat exchanger requirementsDRIVING DOWN TOTAL COST OF OWNERSHIP
A wide range of power ratings available, No aftertreatment technology required, Fuel consumption nominal rated BSFCCOMMITTED TO SUSTAINABLE DEVELOPMENT
Modified piston bowl shape to improve combustion and reduce emissions, Uses K-factor injector to align with predictive model analysis, Better electronic injection control using crank timing vs. cam timing, EPA Marine Tier 3/IMO Tier II Emissions Compliant, Lower IMAT = Lower NOxIMPROVING WORKFORCE EFFICIENCY
Electronic governing (A4 ECU), Instrument panel shipped loose with Color Marine Power Display (MPD), Cold mode start strategy, Programmable low idle, Optional marine alarm and protection systemFULLY INTEGRATED MARINE POWER SOLUTION
Single-source support, Caterpillar warranty for all factory packaged components, Industry-leading one-year warranty on partsStandard Equipment
-
Air Inlet System
- Separate circuit aftercooler core, corrosion resistant coated (air side)
- Powercore air cleaner
-
Control System
- Dual Caterpillar A4 Electronic Engine Control with Electronic Unit Injector Fuel System
- Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module)
-
Exhaust System
- 3500C engines:
-
Fuel System
- Fuel transfer pump
- Electronically Controlled Unit Injectors
-
Lube System
- Crankcase breather groups, Top mounted
- Oil filler and dipstick, LH or RH
- Oil pump, gear type
- 250 or 1000 hour sump oil pan
-
Mounting System
- 3500C engines:
-
Power Takeoffs
- Accessory drives: Lower RH, lower LH
- Front housing, two-sided
-
Protection System
- A4 Electronic Monitoring System provides customer programmable engine derating strategies to protect against adverse operating conditions
- Emergency stop push button (located in Electronic Instrument Panel)
- Safety shutoff protection:
-
General
- Vibration damper and guard
- Lifting eyes
- NOTE: Engines for heat exchanger cooling do NOT include heat exchange
-
Flywheel and Flywheel Housing
- Flywheel, SAE No. 00, 183 teeth
- Flywheel housing, SAE No. 00
-
Cooling System
- Oil cooler
- Thermostats and housing, Full open temperature 92 C (198 F)
- Jacket water pump, gear driven, centrifugal
- Auxiliary fresh water pump
- Aftercooler system: If using glycol, up to maximum 20% glycol concentration is allowed
-
Instrumentation
- Electronic service meter, instrument panel (24V), start/stop switch, emergency stop button, maintenance due light, diagnostic light, warning light, maintenance clear switch, start motor magnetic switch, 15 and 3A breakers
- Graphical Unit (Color Marine Power Display) for analog or digital of:
Optional Equipment
-
Air Inlet System
- Air Inlet Adapters
-
Charging System
- Battery Chargers
- Charging Alternator
-
Control System
- Throttle Control
-
Cooling System
- Coolant Shunt Tank
- Cooling System Options
-
Exhaust System
- Flexible Fittings
- Elbows
- Flanges
- Flange and Exhaust Expanders
- Mufflers
-
Fuel System
- Fuel Cooler Heat Exchanger - Sea Water
- Primary Fuel Filter
- Fuel Level Switch
- Rigid Fuel Lines
- Flexible Fuel Lines
-
Instrumentation
- Communication Modules
- Color Marine Power Display System
- Pilot House Instrument Panels
- Marine Gear Sensors
-
Lube System
- Sump Pumps
- Lubricating Oil
-
Power Take-Offs
- Stub Shafts
- Crankshaft Pulleys
- Damper Guard
- Flexible Coupling and Guards
-
Marine Society Requirements
- Green Passport Documentation
- Spray Shielding
-
Protection System
- Shutoff and Alarm Contactors
-
Special Appearance Packages
- Special Appearance Packages with Chrome Covers
- Yacht Class Finish
-
Starting System
- Air Starting Motor Options
- Battery Sets - 24 Volt - Dry
- Battery Rack
-
Mounting System
- Engine Supports
- Vibration Isolation Mountings
-
Paints
- Paint Color Options
-
Packing
- Shrink Wrap Protection
- Storage Preservation with Glycol Solution/Vapor Corrosion Inhibitor
- Export Boxing
- Export Packaging