Technicial Specifications
Maximum Rating | 2065 BHP 1540 bkW |
Rated Speed | 1000 rpm 1000 rpm |
Emissions | Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx |
Minimum Rating | 1900 BHP 1417 bkW |
Compression Ratio | 9.2:1 Gen 1 (7:6:1 Gen 2) 9.2:1 Gen 1 (7:6:1 Gen 2) |
Length | 167.33 in 4250.3 mm |
Aspiration | Turbocharged-Aftercooled Turbocharged-Aftercooled |
Width | 86.17 in 2188.8 mm |
Rotation from Flywheel End | Counterclockwise Counterclockwise |
Displacement | 7762 in³ 127.2 l |
Height | 116.16 in 2950.6 mm |
Flywheel Teeth | 255 255 |
Weight - Dry | 36883 lb 16730 kg |
Oil Change Interval | 5000 hours 5000 hours |
Ignition, Protection | Electronic (ADEM™ A4) Electronic (ADEM™ A4) |
Stroke | 11.8 in 300 mm |
Bore | 11.8 in 300 mm |
Cooling System | 124 gal (US) 470 l |
Lube Oil System - Refill | 187 gal (US) 708 l |
Advantages and Features
Emissions
Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2010 with the use of an oxidation catalystLean Burn Engine Technology
Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Lean-burn design also provides longer component life and excellent fuel consumption.Ease of Operation
Includes engine mounted thermostats, compress oil cooler connections, jacket water and lube oil heater connections.Advanced Digital Engine Management
ADEM4 engine management system integrates speed control, air/fuel ratio control, and ignition/detonation controls into a complete engine management system. ADEM4 has improved: user interface, display system, shutdown controls, and system diagnostics.Gas Engine Rating Pro
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.https://gerp.cat.comProduct Support Offered Through Global Cat Dealer
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change intervalAftermarket Upgrade Kits
A number of upgrade kits are available for Cat® G3600 engines. For customers looking to enhance the performance, while continuing to meet emissions requirements of their gas compression fleet, consider a Gen 2 Kit and/or the Closed Crankcase Ventilation (CCV) System retrofit.
Find detailed information on each upgrade, including features, benefits, and applicable engine ratings using the link below.
Over 80 Years of Engine Manufacturing Experience
Over 80 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engineWebsite
For all your petroleum power requirements, visit www.cat.com/oilandgasStandard Equipment
-
Air Inlet System
- Air cleaners
- Air Inlet Adapter
-
Control System
- ADEM4
-
Cooling System
- ANSI Class 150 4 inch Flange (outlet water connection)
- ANSI Class 150 6 inch Flange (Inlet Water connection)
- Engine driven Water pump
- Water Jacket Outlet Regulator 88° C
-
Engine Rating
- Engine rating and speed selection
-
Exhaust System
- Hard heat shielded exhaust manifold
- Vertical exhaust outlet
-
Flywheel and Flywheel Housing
- Flywheel. SAE Standard
-
Fuel System
- ANSI Class 150 2 inch Flange ( Customer Connect)
- Fuel Filter
- Gas pressure regulator
-
General
- Paint
- Wood Skid
-
Insrumentation
- Basic HMI Engine Interface
-
Lube System
- Oil pan
- Oil filter
- Oil supply line
- Breathers
- Closed Crankcase Ventilation System
- Engine Driven oil pump
- Front and Rear Oil Drains
- Prelube Pump
-
Mounting System
- Engine mounting feet (4)
- Two lifting eyes
-
Power Take-offs
- Damper Guard
- Single Damper
-
Protection System
- Crankcase explosion relief valve
-
Starting System
- Engine Barring Device
- Starting Motor
Optional Equipment
-
Charging System
- Alternator
-
Exhaust System
- Exhaust expander
- Weld Flange
-
Fuel System
- Fuel Connections
-
General
- Language Decals
- Service Pump
- Service Tools
-
Lube System
- Lubricating Oil
- Oil Level Regulator
-
Mounting System
- Mounting Plates
-
Power Take-offs
- Stub shaft
-
Telmatic System
- Cat Connect Technology
-
Telematic System
- Cell - Satellite radio
- Interconnect Harness
- LAN Adapter
- Product Link Extention Harness