Technicial Specifications
| Maximum Rating | 715 kVA 715 kVA |
| Minimum Rating | 550 kVA 550 kVA |
| Emissions/Fuel Strategy | Low Fuel, EU Stage IIIA Low Fuel, EU Stage IIIA |
| Voltage | 380 to 415 Volts 380 to 415 Volts |
| Frequency | 50 Hz 50 Hz |
| Speed | 1500 rpm 1500 rpm |
| Duty Cycle | Standby, Prime Standby, Prime |
| Engine Model | C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel |
| Bore | 5.71 in 145 mm |
| Stroke | 7.2 in 183 mm |
| Displacement | 1106.4 in³ 18.1 l |
| Compression Ratio | 14.5:1 14.5:1 |
| Aspiration | Air to Air Aftercooled Air to Air Aftercooled |
| Fuel System | Electronic unit injection Electronic unit injection |
| Governor Type | Adem™A4 Adem™A4 |
| Length - Minimum | 218.5 in 5550 mm |
| Length - Maximum | 218.5 in 5550 mm |
| Width - Maximum | 80.9 in 2056 mm |
| Height - Maximum | 107.8 in 2737 mm |
Advantages and Features
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
A-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Standard Equipment
-
Air System
- Air cleaner, light duty
- Turborcharger
-
Air Inlet
- Air cleaner
-
Control Panel
- GCCP 1.3
- GCCP Genset Controller
-
Cooling
- Package mounted radiator
-
Cooling System
- Coolant drain line with valve
- Fan drive, battery charging alternator drive
- Radiator and cooling fan with guard
- Caterpillar extended life coolant
-
Exhaust
- Exhaust flange outlet
-
Exhaust System
- Stainless steel exhaust flex, gaskets, raincap and SAE exhaust flange for customer use - shipped loose
-
Fuel System
- Standard open set fuel tank/base supplied Base, formed steel with single wall integral 8-hour fuel tank
-
Fuel
- Fuel priming pump
- Secondary fuel filters
- Primary fuel filter with integral water separator
-
Generator
- Matched to the performance and output characteristics of Cat engines
- IP23 Protection
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
-
Generator and Attachments
- Segregated low voltage (AC/DC) wiring panel
- Power center, IP22
- Optional LC Frame generator - IP23 Protection,
- Mandatory option rear circuit breaker, IEC, 3 pole, mounted in power center
- Integrated voltage regulator (IVR)
- A Frame generator - IP21 Protection
-
Governing System
- Cat electronic governor (ADEM A4)
-
Power Termination
- Busbar
-
Lube System
- Oil drain valves
- Lubricating oil
-
Mounting System
- Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
-
Starting / Charging
- 24 Volt battery with rack and cables
-
Starting/Charging
- 24 volt starting motor
- Batteries
-
Mounting
- Rubber vibration isolators
-
General
- Engine and alternator pre-paint, Caterpillar yellow
- Paint - Caterpillar yellow except rails and radiators gloss black
Optional Equipment
-
Certifications
- Global
- European Certifications - EU Certificate of Conformance (CE)
-
Exhaust
- Industrial, residential, critical mufflers
-
Air Inlet System
- Dual element air cleaner
- Single element air cleaner
-
Generator
- Oversize and premium generators
- Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
- Anti-condensation heater
-
Power Termination
- Circuit breakers, IEC compliant
- Circuit breakers, UL listed
-
Circuit breakers
- 4 Pole (IEC-100% rated) - package mounted
- 3 Pole (IEC-100% rated) - package mounted
- Padlockable device
- 4 Pole (IEC-100% rated) - motorized
- Power terminal strip
- 3 Pole (IEC-100% rated) - motorized
-
Control Panel
- GCCP 1.4
-
Control Panels
- Local & remote annunciator modules
- Digital I/O module
- Load share module
- EMCP (4.2) (4.3) (4.4)
- Remote monitoring software
-
Control System
- Local alarm modules
- Control panel protective devices
- Remote annunciator module
- Volt free contacts
-
Cooling System
- Radiator duct flange
-
Enclosures
- Sound attenuated enclosures
-
Starting/Charging
- Heavy duty starting system
- Battery chargers
- Charging alternator
- Oversize batteries
- Jacket water heater
-
Exhaust System
- Elbow Kit
- Mufflers - End in/end out
- Manifold and turbocharger guards
- Engine mounted muffler
- Flange groups; 8 and 10 inch weld flanges and gaskets
-
Fuel System
- Integral dual wall fuel tank base
- Manual fuel transfer system
- Fuel transfer system
-
General
- Integral & sub-base UL listed dual wall fuel tanks
- UL 2200 package
- Narrow, wide or skid base
- Enclosures: Sound attenuated, weather protective
- Sound attenuated, weather protective or high ambient weather protective enclosure
- EEC Declaration of Conformity
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- The following options are based on regional and product configuration:
- Single or dual wall sub-base fuel tanks
- Automatic transfer switches (ATS)
- CSA Certification
- EU Certificate of Conformance (CE)
- Single or dual wall integral fuel tanks
-
Generator and Attachments
- A Frame CIP generator
- LC frame generator
- Permanent magnet excitation (PMG)
- LC frame oversize generator
- Space heaters
- Ingress protection
- LC frame CIP generator
- A Frame oversize generator
-
Lube System
- Manual sump pump
-
Mounting System
- Narrow skid base
-
Starting / Charging System
- 5 Amp Battery charger
- Jacket water heater
- Battery disconnect switch
