C32 ACERT Tier 3

C32 ACERT Tier 3

C32 ACERT generator sets incorporate a separate circuit aftercooling system (SCAC) for all configurations. The primary advantage of the SCAC systsem is reduced aftercooler corrosion since no sea water circulates through the aftercooler. Many other improvements on these engines contribute to minimizing owning and operating costs. The EPA Tier 3, IMO II, EU Stage IIIA compliant ratings are available with heat exchanger or keel cooled options. Heat exchanger configurations have an optional front mounted sea water pump.

Minimum Rating 730 ekW (913 kVA) 730 ekW (913 kVA)
Maximum Rating 940 ekW (1175 kVA) 940 ekW (1175 kVA)
Frequency 60hz 60hz

ტექნიკური მახასიათებლები

Generator Set Specifications
Minimum Rating 730 ekW (913 kVA) 730 ekW (913 kVA)
Maximum Rating 940 ekW (1175 kVA) 940 ekW (1175 kVA)
Frequency 60hz 60hz
Speed 1800 rpm 1800 rpm
Emissions/Fuel Strategy EPA Tier III EPA Tier III
Engine Specifications
Aspiration Turbocharged and aftercooled Turbocharged and aftercooled
Bore 5.7 in 145 mm
Stroke 6.38 in 162 mm
Displacement 1959 in³ 32.1 l
Governor Type Electronic Electronic
Fuel System MEUI MEUI
Engine Model Vee-12, 4-stroke-Cycle-Diesel Vee-12, 4-stroke-Cycle-Diesel
Generator Specifications
Excitation Permanent magnet Permanent magnet
Number of Poles 4 4
Number of Bearings 2 roller bearings 2 roller bearings
Number of Leads 6 6
Insulation Class H Class H
IP Rating 23 23
Voltage Regulator CDVR CDVR
Generator Set Dimensions
Width 60.2 in 1528 mm
Height 65.6 in 1667 mm
Weight - Estimated 15721 lb 7131 kg
Length 162.8 in/4271 mm (minimum), 175.3 in/4452 mm (maximum) 162.8 in/4271 mm (minimum), 175.3 in/4452 mm (maximum)

უპირატესობები და მახასიათებლები

Emissions

U.S. EPA Tier 3 compliant

Worldwide Support

Extensive service network of dealers; Unparalleled service from authorized marine dealers

Durability

Proven engine operating history; Performance iron with thousands of hours of validation testing for quality and durability

Reliability

60 months standard warranty

Cooling System

Heat Exchanger or Keel Cooling; Heat exchanger configurations: optional front mounted sea water pump

Aftercooling System

Separate circuit aftercooling system (SCAC): no seawater circulating through the aftercooler

სტანდარტული ტექნიკა

  • AIR INLET SYSTEM
    • Separate circuit after-cooled (SCAC)
    • Turbocharger, jacket water cooled
    • Turbocharger inlet, 152 mm (6 in) OD straight connection
  • CONTROL SYSTEM
    • If an EMCP panel or MGCP option is not chosen as optional equipment, then start/stop controls must be provided by the customer
    • Electronic diagnostics and fault logging
    • Engine Protection Mode for extended ambient conditions
    • Electronic fuel/air ratio control
  • COOLING SYSTEM
    • Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines
    • Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
    • SCAC pump, gear driven
    • Jacket water pump, gear driven
    • Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
    • Jacket water HEX with Sea water pump Connections: 76.2 mm (3in) ID Standard
    • 4 Bolt ANSI Flange Connection
    • Jacket water HEX without Sea water pump Connection: 2.5" hose barb connection (inlet), 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange (outlet)
    • Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
    • SCAC and JW shunt tanks for maintaining proper Pump inlet pressures
  • EXHAUST SYSTEM
    • Water-cooled exhaust manifold & turbocharger
    • 4 Bolt 130 mm (5.12 in) diameter flanged outlet
  • FLYWHEELS & FLYWHEEL HOUSINGS
    • Flywheel Housing, SAE No. 0
    • Flywheel, 18 inch, 136 teeth
    • SAE standard rotation
  • FUEL SYSTEM
    • Duplex Fuel Filters, Spin-on, RH service
    • Fuel connections size: Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)
    • Plate-type fuel cooler installed behind Aftercooler Shunt Tank
    • Fuel transfer pump, gear driven
    • Manual fuel priming pump
  • GENERATORS AND GENERATOR ATTACHMENTS
    • SR5 form wound
    • 2 roller bearings
    • Permanent magnet excitation
    • 4 pole, 6 leads, Series Star connected
    • Caterpillar's Digital Voltage Regulator (CDVR)
    • Marine Class H insulation, Class F temperature rise
    • Surface mounted platinum (PT100) 3-wire RTDs, 2 per phase on stator and one each on support bearings
    • Anti-condensation space heaters (2 elements - 240 VAC, 1000 Watts
    • IP23 Protection suitable for use with Fixed Water Based Local Application Fire Fighting Systems (FWBLAFFS)
    • System IV insulation for harsh environment protection
  • LUBE SYSTEM
    • Simplex oil filters, RH service
    • Deep sump oil pan
    • RH service oil filler locations
    • RH service dipstick
    • Oil pump, gear driven
  • MOUNTING SYSTEM
    • Formed C-channel rails, 300mm (11.81in) height
    • Six shipped loose combined helical spring/rubber
    • isolators for installation below package base
  • GENERAL
    • Front Damper guard
    • Common electrical bondng point on HEX and KEEL cooled engines

აირჩიეთ ტექნიკა

  • ALARM AND PROTECTION
    • Remote panels
    • MCS Controller
    • Power analyzer module
    • Oil level, exhaust temperature, air starting pressure, heat exchanger pressure sensors
  • EXHAUST SYSTEM
    • Dry Elbows
    • Flexible Fitting
    • Flange
    • Muffler
    • Muffler Spark Arresting
    • Rain Cap
  • AIR INLET SYSTEM
    • Air Inlet Cleaner
    • Closed Crankcase Ventilation
    • Air inlet adapter
  • CHARGING SYSTEM
    • Battery Chargers, Charging Alternators
  • CONTROL SYSTEM
    • Load Sharing Attachment
  • FUEL SYSTEM
    • Water Separator
  • LUBE SYSTEM
    • Duplex Oil Filters, Sump Pump
  • PROTECTION SYSTEM
    • Fuel and Oil Shielding
  • STARTING SYSTEM
    • Electric Starting Motors - Single 24 Volt
    • Air Starting Motor
    • Dual Starting Motors (Electric and Air)
    • Air Start Accessories
    • Starting Aids - JW Heaters
    • Battery Sets - 24 Volt - Dry
WhatsApp WhatsApp