ტექნიკური მახასიათებლები
| Maximum Rating | 425 BHP 317 bkW |
| Emissions | NSPS Site Compliant Capable or Non-regulated NSPS Site Compliant Capable or Non-regulated |
| Displacement | 1099 in³ 18 l |
| Minimum Rating | 425 BHP 317 bkW |
| Compression Ratio | 8.5:1 8.5:1 |
| Aspiration | Turbocharged-Aftercooled Turbocharged-Aftercooled |
| Rotation from Flywheel End | Counterclockwise Counterclockwise |
| Flywheel and Flywheel Housing | SAE No. 0 SAE No. 0 |
| Flywheel Teeth | 136 136 |
| Weight - Dry | 4950 lb 2245 kg |
| Oil Change Interval | 750 hours 750 hours |
| Ignition, Protection | Cat EIS Cat EIS |
| Stroke | 6 in 152 mm |
| Bore | 5.4 in 137 mm |
| Cooling System | 14.5 gal (US) 54.9 l |
| Lube Oil System - Refill | 39 gal (US) 147.63 l |
უპირატესობები და მახასიათებლები
Engine Design
• Improved reliability and durability • Ability to burn a wide spectrum of gaseous fuels • Robust diesel strength design prolongs life and lowers owning and operating costs• Broad operating speed rangeEmissions
Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2007/08Lean Burn Engine Technology
Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Leanburn design also provides longer component life and excellent fuel consumption.Cat® Electronic Ignition System (EIS)
Detonation sensitive timing protects the engine against detonation damage. Higher voltage and longer spark duration mean easier starts, fewer misfires, and smoother operation. Diagnostic codes help pinpoint cylinder and component of interest. Spark plug maintenance codes identify spark plug conditionEase of Operation
• Deep sump oil pan has a larger capacity for normal 750-hour oil change intervals• Side covers on block allow for inspection of internal componentsFull Range of Attachments
Large variety of factory-installed engine attachments reduces packaging timeTesting
Every engine is full-load tested to ensure proper engine performance.Gas Engine Rating Pro
GERP is a web-based program designed to provide site performance capabilities for Cat natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.Product Support Offered Through Global Cat Dealer
More than 2,200 dealer outletsCaterpillar factory-trained dealer technicians service every aspect of your petroleum engineCat parts and labor warrantyPreventive maintenance agreements available for repair-before-failure optionsS•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change intervalOver 80 Years of Engine Manufacturing Experience
Over 60 years of natural gas engine productionOwnership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheel housings- Machine critical components- Assemble complete engineWeb Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.სტანდარტული ტექნიკა
-
Air Inlet System
- Air cleaner — single element with service indicator
-
Control System
- Electronic governor
- Air/fuel ratio control
-
Cooling System
- Thermostats and housing
- Jacket water pump
- Aftercooler water pump
- Aftercooler core
-
Exhaust System
- Watercooled exhaust manifolds
- Dry exhaust elbow
-
Flywheel & Flywheel Housing
- SAE No. 0 flywheel
- SAE No. 0 flywheel housing
- SAE standard rotation
-
Fuel System
- Gas pressure regulator (1.5 to 5 psi gas supply required)
- Natural gas carburetor
-
Ignition System
- Cat Electronic Ignition System (EIS) with detonation sensitive timing
-
Instrumentation
- Service meter
-
Lube System
- Crankcase breather — top mounted
- Oil cooler
- Oil filter — RH
- Oil pan — deep sump
- Oil filler — RH in valve cover and RH dipstick
-
Mounting System
- Engine supports
-
Protection System
- Detonation sensitive timing control
- Shutoff
-
General
- Paint — Cat yellow
- Crankshaft vibration damper and pulleys
- Lifting eyes
- Cylinder block inspection covers
აირჩიეთ ტექნიკა
-
Air Inlet System
- Air cleaner — two-stage
- Air inlet adapter
- Precleaner
- Air cleaner rain cap
-
Charging System
- Battery chargers
- Charging alternators
- Ammeter gauge
- Ammeter gauge and wiring
- Control mounting
-
Cooling System
- Radiators
- Blower fan and fan drives for customer suppliedradiators
- Expansion tank
- Heat exchangers
-
Exhaust System
- Flexible fittings
- Elbows
- Flanges
- Rain caps
- Mufflers
- Exhaust manifold — instrument holes at each port
-
Fuel System
- Dual gas regulator
- Carburetor kits
- Fuel filter
-
Ignition System
- CSA ignition
- Ignition ground wiring harness
- Power supply
-
Instrumentation
- Alarm module
- Gauges and instrument panels
-
Mounting System
- Vibration isolators
-
Power Take-offs
- Auxiliary drive pulleys
- Enclosed clutch and clutch support
- Front stub shaft
- Flywheel stub shaft
- Pulley removal
-
Protection System
- Gas valves
- Status control box interconnect wiring harness
-
Starting System
- Air starting motor
- Air pressure regulator
- Air silencer
- Electric start control
- Electric starting motors — single 24V
- Starting aids
- Battery sets — (24V dry), cables, and rack
-
General
- Special paint
