ტექნიკური მახასიათებლები
| Emissions | U.S. EPA Spark Ignited Stationary NSPS emissions for 2010 U.S. EPA Spark Ignited Stationary NSPS emissions for 2010 |
| Minimum Rating | 1680 BHP 1253 bkW |
| Aspiration | Turbocharged- 2 stage after-cooled Turbocharged- 2 stage after-cooled |
| Bore | 6.7 in 170 mm |
| Rotation from Flywheel End | Counterclockwise Counterclockwise |
| Stroke | 7.5 in 190 mm |
| Combustion | Lean Burn Lean Burn |
| Oil Change Interval | 2000 hrs 2000 hrs |
| Lube Oil System - Refill | 143 gal (US) 541 l |
| Governor and Protection | Electronic (ADEM™ A3) Electronic (ADEM™ A3) |
უპირატესობები და მახასიათებლები
Engine Design
- Built on G3500 LE proven reliability and durability
- Ability to burn a wide spectrum of gaseous fuels
- Robust diesel strength design prolongs life and lowers owning and sdfsoperating costs
- Broad operating speed range at lower site air density (high altitude/ sdfshot ambient temperatures)
- Higher power density improves fleet management
- Quality engine diagnostics
- Detonation-sensitive timing control for individual cylinderst temperatures)
Ultra Lean Burn Technology (ULB)
ULB technology uses an advanced control system, a better turbo sdfamatch, improved air and fuel mixing, and a more sophisticated sdfscombustion recipe to provide:- Lowest engine-out emissions
- Highest fuel efficiency
- Improved altitude and speed turndown
- Stable load acceptance and load rejection
Emissions
- Meets U.S. EPA Spark Ignited Stationary NSPS emissions for 2010 and some non-attainment areas
- Lean air/fuel mixture provides best available emissions and fuel efficiency for engines of this bore size
Advanced Digital Engine Management
ADEM A3 engine management system integrates speed control, air/fuel ratio control, and ignition/detonation controls into a complete engine management system. ADEM A3 has improved: user interface, display system, shutdown controls, and system diagnostics.Full Range of Attachments
Large variety of factory-installed engine attachments reduces packaging timeTesting
Every engine is full-load tested to ensure proper engine performanceGas Engine Rating Pro
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site’s altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.Product Support Offered Through Global Cat Dealer
- More than 2,200 dealer outlets
- Cat factory-trained dealer technicians service every aspect of your petroleum engine
- Cat parts and labor warranty
- Preventive maintenance agreements available for repair sdfsbefore-failure options
- S•O•SSM program matches your oil and coolant samples sdfdagainst Caterpillar set standards to determine:-Internal engine component condition-Presence of unwanted fluid-Presence of combustion by-products-Site-specific oil change interval
Web Site
For all your Oil & Gas power requirements, visit www.cat.com/oilandgasსტანდარტული ტექნიკა
-
Air Inlet System
- Axial Flow Air cleaner
- Single element canister type with service indicator
-
Cooling System
- Two-stage charge air cooling: First stage - JW + OC + 1st stage AC / Second stage - 2nd stage AC
- Engine Cooling and Charge Air Cooling Thermostats
-
Exhaust System
- Water-cooled exhaust elbows and manifolds
- Dry turbocharger housings
- Water-cooled exhaust elbow
-
Flywheels and Flywheel Housings
- SAE No. 21 flywheel
- SAE No. 00 flywheel housing
- SAE Counterclockwise rotation
-
Fuel System
- 7-40 psig gas supply
- Electronic fuel metering valve
- Gas pressure regulator
- Gas shutoff valve
-
Lubrication System
- Crankcase breather — top mounted
- Oil cooler
- Deep Sump Oil Pan
- Oil sampling valve
- Turbo oil accumulator
აირჩიეთ ტექნიკა
-
Air Inlet System
- Round air inlet adaptors
- Rain shield
-
Charging System
- CSA alternator (24V,65A)
-
Cooling System
- Jacket water inlet flange-hose connection
-
Exhaust System
- Flexible fittings
- Weld Flanges
- Elbow
-
Fuel System
- Fuel filter
-
Instrumentation
- Interconnect Harness
- 8 inch HMI Engine Control Panel
-
Lubrication System
- Lubricating oil
- Oil bypass filter
- Air prelube pump
- Oil pan drain
-
Starting System
- Air pressure regulator
- 90 psi starter
- 150 psi starter
