ტექნიკური მახასიათებლები
| Maximum Rating | 1150 BHP 858 bkW |
| Emissions | U.S. EPA Non-road Tier 2 U.S. EPA Non-road Tier 2 |
| Displacement | 1658 in³ 27.2 l |
| Minimum Rating | 800 BHP 597 bkW |
| Bore | 5.42 in 137.7 mm |
| Stroke | 6 in 152.4 mm |
| Aspiration | Turbocharged-Aftercooled Turbocharged-Aftercooled |
| Governor and Protection | ADEM A3 ADEM A3 |
| Engine Weight - Net Dry | 6382 lb 2895 kg |
| Oil Change Interval | 250 250 |
| Rotation from Flywheel End | Counterclockwise Counterclockwise |
| Flywheel and Flywheel Housing | SAE No. 0 or SAE No. 1 SAE No. 0 or SAE No. 1 |
| Flywheel Teeth | 136 (SAE 0), 113 (SAE 1) 136 (SAE 0), 113 (SAE 1) |
| Minimum Cooling System - Engine Only | 14.5 gal (US) 54.9 l |
| Length | 75.5 in 1918 mm |
| Width | 57.6 in 1463 mm |
| Height | 52 in 1321 mm |
უპირატესობები და მახასიათებლები
Custom Packaging
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.Custom Packaging
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.Transmissions
Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface. Cat transmissions deliver continuous operation under full load, smooth shifting at any speed, and maximum up time, with unmatched durability and easy maintenanceFull Range of Attachments
Large variety of factory-installed engine attachments reduces packaging timeTesting
Every engine is full-load tested to ensure proper engine performance.Product Support Offered Through Global Cat Dealer
- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your petroleum engine - Cat parts and labor warranty - Preventive maintenance agreements available for repairbefore-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change intervalOver 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgasსტანდარტული ტექნიკა
-
Air Inlet System
- Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection
-
Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and TEL
- Electronic diagnostics and fault logging
- Engine monitoring and protection system (speed, temperature, pressure)
- J1939 Broadcast (diagnostic, engine status, and control)
-
Cooling System
- Thermostats and housing — outlet LH vertical orientation
- Jacket water pump — gear-driven, centrifugal RH
-
Exhaust System
- Exhaust manifold — dry, heat shields
- Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
- Water-cooled center sections
-
Flywheels and Flywheel Housings
- SAE No. 0 or SAE No. 1
- SAE standard rotation
-
Fuel System
- MEUI system
- Fuel filter, RH ( 2 micron high performance)
- Fuel transfer pump
- Fuel priming pump (optional electric priming pump)
-
Lube System
- Crankcase breather — rear mounted
- Oil cooler — RH
- Side turbo — oil filler in RH front gear case
- Rear turbo — oil filler in RH valve cover
- Oil level gauge — RH
- Oil filter — RH
- Oil pan rear sump
-
Mounting System
- Front support — narrow
-
Power Take-Offs
- Crankshaft pulley — 203.2 mm (8 in), 5 grooves 15.9 mm (.63 in) wide; 292.1 mm (11.5 in.) 1 groove 15.9 mm (.63 in.) wide
-
General
- Vibration damper
- Paint — Cat yellow
- Lifting eyes
- Automatic variable timing, electronic
- Electronic installation kit 70-pin connector (connectors, pins, sockets)
აირჩიეთ ტექნიკა
-
Air Inlet System
- Air lines
- Air cleaners
- Precleaners
-
Charging System
- Battery chargers
- Charging alternators
- Alternator mountings
-
Circuit Breakers
- Circuit breaker mounting
-
Cooling System
- Blower fans
- Suction fans
- Radiators
-
Exhaust System
- Muffler
-
Fuel Systems
- Electric fuel priming pump
-
Instrumentation
- Gauges and instrument panels
-
Lube System
- Lubricating oil
- Oil pan
- Oil filter
-
Mounting System
- Engine supports
-
Power Take-Offs
- Hydraulic pump drives
- Pulley
- Auxiliary drive
-
Starting System
- Electric starting motor
- Battery sets - 24V
- Battery cable
- Battery rack
- Starting aids
-
Packaging
- Overseas preservation
- Storage preservation
- Export packaging
